Seat Alhambra 2.0 TDI CR 140hp Remap
Expected gains of +40 BHP and +80 Nm torque
Get Your Free Quote ↓BHP+40 hp (29%)
Standard
140 hp
Tuned
180 hp
Torque+80 Nm (25%)
Standard
320 Nm
Tuned
400 Nm
Suitability
Excellent (8/10)Gains Profile
BalancedHeadroom
HighSeat Alhambra 2.0 TDI CR 140hp ECU Remapping
Considering an ECU remap for your Seat Alhambra 2.0 TDI CR 140hp? A Stage 1 remap can take this 2010 -> diesel engine from 140 BHP to 180 BHP and from 320 Nm to 400 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Seat Alhambra can achieve.
How this engine compares
- 8thof 19 Seat Alhambra engines by power gain
- 63%of the 9,842 engines we hold gain data for see a smaller power increase
- 64%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Seat Alhambra 2.0 TDI CR 140hp is a 2.0L turbocharged diesel engine producing 140 BHP and 320 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 180 BHP and 400 Nm — a gain of around 40 BHP (29%) and 80 Nm (25%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other Alhambra 2010 -> Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0 TDI CR 115hp | 115 → 185 |