BHP+27 hp (23%)
Standard
115 hp
Tuned
142 hp
Torque+42 Nm (16%)
Standard
260 Nm
Tuned
302 Nm
Suitability
Good (7/10)Gains Profile
Power-focusedHeadroom
MediumRover 75 2.0 CDTI 115hp ECU Remapping
Considering an ECU remap for your Rover 75 2.0 CDTI 115hp? A Stage 1 remap can take this All diesel engine from 115 BHP to 142 BHP and from 260 Nm to 302 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Rover 75 can achieve.
How this engine compares
- 2ndof 2 Rover 75 engines by power gain
- 35%of the 9,842 engines we hold gain data for see a smaller power increase
- 25%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Rover 75 2.0 CDTI 115hp is a 2.0L turbocharged diesel engine producing 115 BHP and 260 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 142 BHP and 302 Nm — a gain of around 27 BHP (23%) and 42 Nm (16%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other 75 All Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0 CDTI 131hp | 131 → 160 | +29 |