Renault Vel Satis 2.2 DCi 150hp Remap
Expected gains of +30 BHP and +55 Nm torque
Get Your Free Quote ↓BHP+30 hp (20%)
Standard
150 hp
Tuned
180 hp
Torque+55 Nm (17%)
Standard
320 Nm
Tuned
375 Nm
Suitability
Good (7/10)Gains Profile
BalancedHeadroom
MediumRenault Vel Satis 2.2 DCi 150hp ECU Remapping
Considering an ECU remap for your Renault Vel Satis 2.2 DCi 150hp? A Stage 1 remap can take this All diesel engine from 150 BHP to 180 BHP and from 320 Nm to 375 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Renault Vel Satis can achieve.
How this engine compares
- 3rdof 6 Renault Vel Satis engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 38%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Renault Vel Satis 2.2 DCi 150hp is a 2.2L turbocharged diesel engine producing 150 BHP and 320 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 180 BHP and 375 Nm — a gain of around 30 BHP (20%) and 55 Nm (17%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other Vel Satis All Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.2 DCi 115hp | 115 → 140 |