Renault Talisman 2.0 BlueDCI 160hp Remap
Expected gains of +30 BHP and +40 Nm torque
Get Your Free Quote ↓BHP+30 hp (19%)
Standard
160 hp
Tuned
190 hp
Torque+40 Nm (11%)
Standard
360 Nm
Tuned
400 Nm
Suitability
Good (6.5/10)Gains Profile
Power-focusedHeadroom
MediumRenault Talisman 2.0 BlueDCI 160hp ECU Remapping
Considering an ECU remap for your Renault Talisman 2.0 BlueDCI 160hp? A Stage 1 remap can take this 2020 -> diesel engine from 160 BHP to 190 BHP and from 360 Nm to 400 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Renault Talisman can achieve.
How this engine compares
- 6thof 16 Renault Talisman engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 21%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Renault Talisman 2.0 BlueDCI 160hp is a 2.0L turbocharged diesel engine producing 160 BHP and 360 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 190 BHP and 400 Nm — a gain of around 30 BHP (19%) and 40 Nm (11%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other Talisman 2020 -> Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.7 BlueDCI 120hp | 120 → 170 | +50 |