BHP+25 hp (19%)
Standard
130 hp
Tuned
155 hp
Torque+50 Nm (16%)
Standard
320 Nm
Tuned
370 Nm
Suitability
Good (7/10)Gains Profile
BalancedHeadroom
MediumRenault Megane 1.6 dCi 130hp ECU Remapping
Considering an ECU remap for your Renault Megane 1.6 dCi 130hp? A Stage 1 remap can take this 4 - (ph1) - 2016 - 2020 diesel engine from 130 BHP to 155 BHP and from 320 Nm to 370 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Renault Megane can achieve.
How this engine compares
- 32ndof 77 Renault Megane engines by power gain
- 28%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Renault Megane 1.6 dCi 130hp is a 1.6L turbocharged diesel engine producing 130 BHP and 320 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 155 BHP and 370 Nm — a gain of around 25 BHP (19%) and 50 Nm (16%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other Megane 4 - (ph1) - 2016 - 2020 Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.5 dCi 90hp | 90 → 110 |