BHP+10 hp (7%)
Standard
140 hp
Tuned
150 hp
Torque+20 Nm (10%)
Standard
195 Nm
Tuned
215 Nm
Suitability
Moderate (4/10)Gains Profile
Torque-focusedHeadroom
LowRenault Megane 2.0i 16v 140hp ECU Remapping
Considering an ECU remap for your Renault Megane 2.0i 16v 140hp? A Stage 1 remap can take this 3 - (ph1) - 2008 - 2012 petrol engine from 140 BHP to 150 BHP and from 195 Nm to 215 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Renault Megane can achieve.
How this engine compares
- 65thof 77 Renault Megane engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Renault Megane 2.0i 16v 140hp is a 2.0L naturally aspirated petrol engine producing 140 BHP and 195 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 150 BHP and 215 Nm — a gain of around 10 BHP (7%) and 20 Nm (10%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Megane 3 - (ph1) - 2008 - 2012 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|