BHP+24 hp (18%)
Standard
136 hp
Tuned
160 hp
Torque+70 Nm (26%)
Standard
270 Nm
Tuned
340 Nm
Suitability
Good (7.5/10)Gains Profile
Torque-focusedHeadroom
HighRenault Maxity 2.5 DCi 136hp ECU Remapping
Considering an ECU remap for your Renault Maxity 2.5 DCi 136hp? A Stage 1 remap can take this -> 2015 diesel engine from 136 BHP to 160 BHP and from 270 Nm to 340 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Renault Maxity can achieve.
How this engine compares
- 7thof 7 Renault Maxity engines by power gain
- 27%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Renault Maxity 2.5 DCi 136hp is a 2.5L turbocharged diesel engine producing 136 BHP and 270 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 160 BHP and 340 Nm — a gain of around 24 BHP (18%) and 70 Nm (26%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Other Maxity -> 2015 Engines
| Engine | BHP | Gain |
|---|