Renault Master 2.3 DCI (Euro 6) 130hp Remap
Expected gains of +30 BHP and +50 Nm torque
Get Your Free Quote ↓BHP+30 hp (23%)
Standard
130 hp
Tuned
160 hp
Torque+50 Nm (15%)
Standard
340 Nm
Tuned
390 Nm
Suitability
Good (7/10)Gains Profile
Power-focusedHeadroom
MediumRenault Master 2.3 DCI (Euro 6) 130hp ECU Remapping
Considering an ECU remap for your Renault Master 2.3 DCI (Euro 6) 130hp? A Stage 1 remap can take this Mk4 - 2016 - 2019 diesel engine from 130 BHP to 160 BHP and from 340 Nm to 390 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Renault Master can achieve.
How this engine compares
- 16thof 29 Renault Master engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Renault Master 2.3 DCI (Euro 6) 130hp is a 2.3L turbocharged diesel engine producing 130 BHP and 340 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 160 BHP and 390 Nm — a gain of around 30 BHP (23%) and 50 Nm (15%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other Master Mk4 - 2016 - 2019 Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.3 DCI (Euro 6) 110hp | 110 → 160 |