BHP+40 hp (33%)
Standard
120 hp
Tuned
160 hp
Torque+60 Nm (20%)
Standard
300 Nm
Tuned
360 Nm
Suitability
Good (7.5/10)Gains Profile
Power-focusedHeadroom
HighRenault Master 2.0 DCi 120hp ECU Remapping
Considering an ECU remap for your Renault Master 2.0 DCi 120hp? A Stage 1 remap can take this Mk2 - 1998 - 2010 diesel engine from 120 BHP to 160 BHP and from 300 Nm to 360 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Renault Master can achieve.
How this engine compares
- 10thof 29 Renault Master engines by power gain
- 63%of the 9,842 engines we hold gain data for see a smaller power increase
- 41%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Renault Master 2.0 DCi 120hp is a 2.0L turbocharged diesel engine producing 120 BHP and 300 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 160 BHP and 360 Nm — a gain of around 40 BHP (33%) and 60 Nm (20%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
Other Master Mk2 - 1998 - 2010 Engines
| Engine | BHP | Gain |
|---|