BHP+20 hp (18%)
Standard
110 hp
Tuned
130 hp
Torque+40 Nm (15%)
Standard
260 Nm
Tuned
300 Nm
Suitability
Good (7/10)Gains Profile
BalancedHeadroom
MediumRenault Captur 1.5 DCi 110hp ECU Remapping
Considering an ECU remap for your Renault Captur 1.5 DCi 110hp? A Stage 1 remap can take this 2013 - 2018 diesel engine from 110 BHP to 130 BHP and from 260 Nm to 300 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Renault Captur can achieve.
How this engine compares
- 6thof 13 Renault Captur engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 21%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Renault Captur 1.5 DCi 110hp is a 1.5L turbocharged diesel engine producing 110 BHP and 260 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 130 BHP and 300 Nm — a gain of around 20 BHP (18%) and 40 Nm (15%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other Captur 2013 - 2018 Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 0.9 TCE 90hp | 90 → 107 |