BHP+30 hp (19%)
Standard
160 hp
Tuned
190 hp
Torque+57 Nm (14%)
Standard
403 Nm
Tuned
460 Nm
Suitability
Good (7/10)Gains Profile
Power-focusedHeadroom
MediumRenault Alaskan 2.3 dCi 160hp ECU Remapping
Considering an ECU remap for your Renault Alaskan 2.3 dCi 160hp? A Stage 1 remap can take this 2017 -> diesel engine from 160 BHP to 190 BHP and from 403 Nm to 460 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Renault Alaskan can achieve.
How this engine compares
- 1stof 2 Renault Alaskan engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 40%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Renault Alaskan 2.3 dCi 160hp is a 2.3L turbocharged diesel engine producing 160 BHP and 403 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 190 BHP and 460 Nm — a gain of around 30 BHP (19%) and 57 Nm (14%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Alaskan 2017 -> Engines
| Engine | BHP | Gain | Torque |
|---|