BHP+55 hp (13%)
Standard
420 hp
Tuned
475 hp
Torque+70 Nm (14%)
Standard
500 Nm
Tuned
570 Nm
Suitability
Good (6/10)Gains Profile
BalancedHeadroom
MediumPorsche Panamera S 3.0T 420hp ECU Remapping
Considering an ECU remap for your Porsche Panamera S 3.0T 420hp? A Stage 1 remap can take this 970 - 2013 - 2016 petrol engine from 420 BHP to 475 BHP and from 500 Nm to 570 Nm of torque (turbocharged). This engine scores 6/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Porsche Panamera can achieve.
How this engine compares
- 19thof 32 Porsche Panamera engines by power gain
- 82%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Porsche Panamera S 3.0T 420hp is a 3.0L turbocharged petrol engine producing 420 BHP and 500 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 475 BHP and 570 Nm — a gain of around 55 BHP (13%) and 70 Nm (14%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
!High tuned torque: check transmission torque capacity and service history.