BHP+45 hp (13%)
Standard
355 hp
Tuned
400 hp
Torque+120 Nm (25%)
Standard
480 Nm
Tuned
600 Nm
Suitability
Good (6.5/10)Gains Profile
Torque-focusedHeadroom
MediumPorsche Macan S 3.0T 355hp ECU Remapping
Considering an ECU remap for your Porsche Macan S 3.0T 355hp? A Stage 1 remap can take this 2019 - 2021 petrol engine from 355 BHP to 400 BHP and from 480 Nm to 600 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Porsche Macan can achieve.
How this engine compares
- 11thof 15 Porsche Macan engines by power gain
- 71%of the 9,842 engines we hold gain data for see a smaller power increase
- 87%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Porsche Macan S 3.0T 355hp is a 3.0L turbocharged petrol engine producing 355 BHP and 480 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 400 BHP and 600 Nm — a gain of around 45 BHP (13%) and 120 Nm (25%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
!High tuned torque: check transmission torque capacity and service history.