BHP+52 hp (20%)
Standard
258 hp
Tuned
310 hp
Torque+70 Nm (12%)
Standard
580 Nm
Tuned
650 Nm
Suitability
Good (7/10)Gains Profile
Power-focusedHeadroom
MediumPorsche Macan S Diesel 258hp ECU Remapping
Considering an ECU remap for your Porsche Macan S Diesel 258hp? A Stage 1 remap can take this 2014 - 2018 diesel engine from 258 BHP to 310 BHP and from 580 Nm to 650 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Porsche Macan can achieve.
How this engine compares
- 8thof 15 Porsche Macan engines by power gain
- 80%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Porsche Macan S Diesel 258hp is a 3.0L turbocharged diesel engine producing 258 BHP and 580 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 310 BHP and 650 Nm — a gain of around 52 BHP (20%) and 70 Nm (12%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Macan 2014 - 2018 Engines
| Engine | BHP | Gain | Torque |
|---|