BHP+45 hp (18%)
Standard
245 hp
Tuned
290 hp
Torque+70 Nm (13%)
Standard
550 Nm
Tuned
620 Nm
Suitability
Good (7/10)Gains Profile
Power-focusedHeadroom
MediumPorsche Cayenne 3.0 TDI 245hp ECU Remapping
Considering an ECU remap for your Porsche Cayenne 3.0 TDI 245hp? A Stage 1 remap can take this 958 - 2010 - 2014 diesel engine from 245 BHP to 290 BHP and from 550 Nm to 620 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Porsche Cayenne can achieve.
How this engine compares
- 23rdof 37 Porsche Cayenne engines by power gain
- 71%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Porsche Cayenne 3.0 TDI 245hp is a 3.0L turbocharged diesel engine producing 245 BHP and 550 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 290 BHP and 620 Nm — a gain of around 45 BHP (18%) and 70 Nm (13%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Cayenne 958 - 2010 - 2014 Engines
| Engine | BHP | Gain | Torque |
|---|