BHP+25 hp (9%)
Standard
265 hp
Tuned
290 hp
Torque+20 Nm (7%)
Standard
280 Nm
Tuned
300 Nm
Suitability
Moderate (4/10)Gains Profile
Power-focusedHeadroom
LowPorsche Boxster 2.7i 265hp ECU Remapping
Considering an ECU remap for your Porsche Boxster 2.7i 265hp? A Stage 1 remap can take this 2011 - 2016 ( 981 ) petrol engine from 265 BHP to 290 BHP and from 280 Nm to 300 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Porsche Boxster can achieve.
How this engine compares
- 11thof 25 Porsche Boxster engines by power gain
- 28%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Porsche Boxster 2.7i 265hp is a 2.7L naturally aspirated petrol engine producing 265 BHP and 280 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 290 BHP and 300 Nm — a gain of around 25 BHP (9%) and 20 Nm (7%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Boxster 2011 - 2016 ( 981 ) Engines
| Engine | BHP | Gain | Torque | Gain |
|---|