BHP+17 hp (7%)
Standard
228 hp
Tuned
245 hp
Torque+30 Nm (12%)
Standard
260 Nm
Tuned
290 Nm
Suitability
Moderate (4/10)Gains Profile
Torque-focusedHeadroom
LowPorsche Boxster 2.7i 228hp ECU Remapping
Considering an ECU remap for your Porsche Boxster 2.7i 228hp? A Stage 1 remap can take this 1996 - 2004 ( 986 ) petrol engine from 228 BHP to 245 BHP and from 260 Nm to 290 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Porsche Boxster can achieve.
How this engine compares
- 20thof 25 Porsche Boxster engines by power gain
- 12%of the 9,842 engines we hold gain data for see a smaller power increase
- 17%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Porsche Boxster 2.7i 228hp is a 2.7L naturally aspirated petrol engine producing 228 BHP and 260 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 245 BHP and 290 Nm — a gain of around 17 BHP (7%) and 30 Nm (12%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Boxster 1996 - 2004 ( 986 ) Engines
| Engine | BHP | Gain | Torque | Gain |
|---|