BHP+25 hp (5%)
Standard
500 hp
Tuned
525 hp
Torque+25 Nm (5%)
Standard
460 Nm
Tuned
485 Nm
Suitability
Limited (3.5/10)Gains Profile
Limited headroomHeadroom
LowPorsche 911 4.0 GT3 RS 500hp ECU Remapping
Considering an ECU remap for your Porsche 911 4.0 GT3 RS 500hp? A Stage 1 remap can take this 2011 - 2015 ( 991 ) petrol engine from 500 BHP to 525 BHP and from 460 Nm to 485 Nm of torque (naturally aspirated). This engine scores 3.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Porsche 911 can achieve.
How this engine compares
- 25thof 49 Porsche 911 engines by power gain
- 28%of the 9,842 engines we hold gain data for see a smaller power increase
- 14%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Porsche 911 4.0 GT3 RS 500hp is a 4.0L naturally aspirated petrol engine producing 500 BHP and 460 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 525 BHP and 485 Nm — a gain of around 25 BHP (5%) and 25 Nm (5%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.
Other 911 2011 - 2015 ( 991 ) Engines
| Engine |
|---|