BHP+20 hp (13%)
Standard
150 hp
Tuned
170 hp
Torque+20 Nm (10%)
Standard
210 Nm
Tuned
230 Nm
Suitability
Moderate (4.5/10)Gains Profile
Power-focusedHeadroom
MediumPontiac Sunfire 2.4i 150hp ECU Remapping
Considering an ECU remap for your Pontiac Sunfire 2.4i 150hp? A Stage 1 remap can take this 1997 - 2005 petrol engine from 150 BHP to 170 BHP and from 210 Nm to 230 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Pontiac Sunfire can achieve.
How this engine compares
- 1stof 2 Pontiac Sunfire engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Pontiac Sunfire 2.4i 150hp is a 2.4L naturally aspirated petrol engine producing 150 BHP and 210 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 170 BHP and 230 Nm — a gain of around 20 BHP (13%) and 20 Nm (10%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Sunfire 1997 - 2005 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|