BHP+32 hp (20%)
Standard
163 hp
Tuned
195 hp
Torque+40 Nm (11%)
Standard
370 Nm
Tuned
410 Nm
Suitability
Good (7/10)Gains Profile
Power-focusedHeadroom
MediumPeugeot 807 2.2 HDiF 163hp ECU Remapping
Considering an ECU remap for your Peugeot 807 2.2 HDiF 163hp? A Stage 1 remap can take this All diesel engine from 163 BHP to 195 BHP and from 370 Nm to 410 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Peugeot 807 can achieve.
How this engine compares
- 3rdof 8 Peugeot 807 engines by power gain
- 51%of the 9,842 engines we hold gain data for see a smaller power increase
- 21%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Peugeot 807 2.2 HDiF 163hp is a 2.2L turbocharged diesel engine producing 163 BHP and 370 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 195 BHP and 410 Nm — a gain of around 32 BHP (20%) and 40 Nm (11%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other 807 All Engines
| Engine | BHP | Gain | Torque |
|---|