BHP+45 hp (28%)
Standard
160 hp
Tuned
205 hp
Torque+60 Nm (15%)
Standard
400 Nm
Tuned
460 Nm
Suitability
Good (7.5/10)Gains Profile
Power-focusedHeadroom
HighPeugeot 508 2.0 BlueHDi 160hp ECU Remapping
Considering an ECU remap for your Peugeot 508 2.0 BlueHDi 160hp? A Stage 1 remap can take this Ph3 - 2018 -> diesel engine from 160 BHP to 205 BHP and from 400 Nm to 460 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Peugeot 508 can achieve.
How this engine compares
- 5thof 28 Peugeot 508 engines by power gain
- 71%of the 9,842 engines we hold gain data for see a smaller power increase
- 41%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Peugeot 508 2.0 BlueHDi 160hp is a 2.0L turbocharged diesel engine producing 160 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 205 BHP and 460 Nm — a gain of around 45 BHP (28%) and 60 Nm (15%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other 508 Ph3 - 2018 -> Engines
| Engine | BHP | Gain | Torque |
|---|