Peugeot 5008 1.6 Puretech 180hp Remap
Expected gains of +35 BHP and +50 Nm torque
Get Your Free Quote ↓BHP+35 hp (19%)
Standard
180 hp
Tuned
215 hp
Torque+50 Nm (20%)
Standard
250 Nm
Tuned
300 Nm
Suitability
Good (7/10)Gains Profile
BalancedHeadroom
MediumPeugeot 5008 1.6 Puretech 180hp ECU Remapping
Considering an ECU remap for your Peugeot 5008 1.6 Puretech 180hp? A Stage 1 remap can take this 2017 - 2020 petrol engine from 180 BHP to 215 BHP and from 250 Nm to 300 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Peugeot 5008 can achieve.
How this engine compares
- 4thof 27 Peugeot 5008 engines by power gain
- 54%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Peugeot 5008 1.6 Puretech 180hp is a 1.6L turbocharged petrol engine producing 180 BHP and 250 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 215 BHP and 300 Nm — a gain of around 35 BHP (19%) and 50 Nm (20%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
Other 5008 2017 - 2020 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|