BHP+25 hp (17%)
Standard
150 hp
Tuned
175 hp
Torque+60 Nm (20%)
Standard
300 Nm
Tuned
360 Nm
Suitability
Good (7/10)Gains Profile
BalancedHeadroom
MediumPeugeot 4008 1.8 HDi 150hp ECU Remapping
Considering an ECU remap for your Peugeot 4008 1.8 HDi 150hp? A Stage 1 remap can take this 2012 -> diesel engine from 150 BHP to 175 BHP and from 300 Nm to 360 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Peugeot 4008 can achieve.
How this engine compares
- 1stof 2 Peugeot 4008 engines by power gain
- 28%of the 9,842 engines we hold gain data for see a smaller power increase
- 41%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Peugeot 4008 1.8 HDi 150hp is a 1.8L turbocharged diesel engine producing 150 BHP and 300 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 175 BHP and 360 Nm — a gain of around 25 BHP (17%) and 60 Nm (20%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other 4008 2012 -> Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.6 HDi 8V 115hp | 115 → 140 |