BHP+25 hp (22%)
Standard
115 hp
Tuned
140 hp
Torque+40 Nm (14%)
Standard
285 Nm
Tuned
325 Nm
Suitability
Good (7/10)Gains Profile
Power-focusedHeadroom
MediumPeugeot 308 1.6 HDi 115hp ECU Remapping
Considering an ECU remap for your Peugeot 308 1.6 HDi 115hp? A Stage 1 remap can take this 2013 - 2017 diesel engine from 115 BHP to 140 BHP and from 285 Nm to 325 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Peugeot 308 can achieve.
How this engine compares
- 24thof 44 Peugeot 308 engines by power gain
- 28%of the 9,842 engines we hold gain data for see a smaller power increase
- 21%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Peugeot 308 1.6 HDi 115hp is a 1.6L turbocharged diesel engine producing 115 BHP and 285 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 140 BHP and 325 Nm — a gain of around 25 BHP (22%) and 40 Nm (14%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other 308 2013 - 2017 Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.6 HDiF 92hp | 92 → 115 | +23 |