Peugeot 3008 2.0 BlueHDi 150hp Remap
Expected gains of +55 BHP and +90 Nm torque
Get Your Free Quote ↓BHP+55 hp (37%)
Standard
150 hp
Tuned
205 hp
Torque+90 Nm (24%)
Standard
370 Nm
Tuned
460 Nm
Suitability
Excellent (8.5/10)Gains Profile
Power-focusedHeadroom
HighPeugeot 3008 2.0 BlueHDi 150hp ECU Remapping
Considering an ECU remap for your Peugeot 3008 2.0 BlueHDi 150hp? A Stage 1 remap can take this 2016 - 2020 diesel engine from 150 BHP to 205 BHP and from 370 Nm to 460 Nm of torque (turbocharged). This engine scores 8.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Peugeot 3008 can achieve.
How this engine compares
- 1stof 29 Peugeot 3008 engines by power gain
- 82%of the 9,842 engines we hold gain data for see a smaller power increase
- 74%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Peugeot 3008 2.0 BlueHDi 150hp is a 2.0L turbocharged diesel engine producing 150 BHP and 370 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 205 BHP and 460 Nm — a gain of around 55 BHP (37%) and 90 Nm (24%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other 3008 2016 - 2020 Engines
| Engine | BHP | Gain | Torque |
|---|