BHP+15 hp (20%)
Standard
75 hp
Tuned
90 hp
Torque+12 Nm (10%)
Standard
118 Nm
Tuned
130 Nm
Suitability
Moderate (5/10)Gains Profile
Power-focusedHeadroom
MediumPeugeot 208 1.2 Puretech 75hp ECU Remapping
Considering an ECU remap for your Peugeot 208 1.2 Puretech 75hp? A Stage 1 remap can take this 2019 -> petrol engine from 75 BHP to 90 BHP and from 118 Nm to 130 Nm of torque (naturally aspirated). This engine scores 5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Peugeot 208 can achieve.
How this engine compares
- 19thof 23 Peugeot 208 engines by power gain
- 9%of the 9,842 engines we hold gain data for see a smaller power increase
- 1%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Peugeot 208 1.2 Puretech 75hp is a 1.2L naturally aspirated petrol engine producing 75 BHP and 118 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 90 BHP and 130 Nm — a gain of around 15 BHP (20%) and 12 Nm (10%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. Unusually high gain for NA engine: treat as an estimate and verify against the exact engine variant.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!Unusually high gain for NA engine: treat as an estimate and verify against the exact engine variant.