BHP+55 hp (55%)
Standard
100 hp
Tuned
155 hp
Torque+100 Nm (35%)
Standard
285 Nm
Tuned
385 Nm
Suitability
Excellent (8.5/10)Gains Profile
Power-focusedHeadroom
HighOpel Movano 2.3 CDTi 100hp ECU Remapping
Considering an ECU remap for your Opel Movano 2.3 CDTi 100hp? A Stage 1 remap can take this (B) - 2010 - 2014 diesel engine from 100 BHP to 155 BHP and from 285 Nm to 385 Nm of torque (turbocharged). This engine scores 8.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Opel Movano can achieve.
How this engine compares
- 5thof 26 Opel Movano engines by power gain
- 82%of the 9,842 engines we hold gain data for see a smaller power increase
- 79%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Opel Movano 2.3 CDTi 100hp is a 2.3L turbocharged diesel engine producing 100 BHP and 285 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 155 BHP and 385 Nm — a gain of around 55 BHP (55%) and 100 Nm (35%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: economy gains unlikely at full power; depends on driving style.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Other Movano (B) - 2010 - 2014 Engines
| Engine | BHP | Gain |
|---|