BHP+30 hp (23%)
Standard
130 hp
Tuned
160 hp
Torque+50 Nm (17%)
Standard
300 Nm
Tuned
350 Nm
Suitability
Good (7/10)Gains Profile
Power-focusedHeadroom
MediumOpel Meriva 1.7 CDTi 130hp ECU Remapping
Considering an ECU remap for your Opel Meriva 1.7 CDTi 130hp? A Stage 1 remap can take this (B) - 2010 - 2013 diesel engine from 130 BHP to 160 BHP and from 300 Nm to 350 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Opel Meriva can achieve.
How this engine compares
- 6thof 25 Opel Meriva engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Opel Meriva 1.7 CDTi 130hp is a 1.7L turbocharged diesel engine producing 130 BHP and 300 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 160 BHP and 350 Nm — a gain of around 30 BHP (23%) and 50 Nm (17%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other Meriva (B) - 2010 - 2013 Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.3 CDTi 75hp | 75 → 95 | +20 |