BHP+30 hp (30%)
Standard
100 hp
Tuned
130 hp
Torque+60 Nm (25%)
Standard
240 Nm
Tuned
300 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighOpel Meriva 1.7 CDTi 100hp ECU Remapping
Considering an ECU remap for your Opel Meriva 1.7 CDTi 100hp? A Stage 1 remap can take this (A) - 2003 - 2010 diesel engine from 100 BHP to 130 BHP and from 240 Nm to 300 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Opel Meriva can achieve.
How this engine compares
- 6thof 25 Opel Meriva engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 41%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Opel Meriva 1.7 CDTi 100hp is a 1.7L turbocharged diesel engine producing 100 BHP and 240 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 130 BHP and 300 Nm — a gain of around 30 BHP (30%) and 60 Nm (25%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
Other Meriva (A) - 2003 - 2010 Engines
| Engine | BHP | Gain |
|---|