BHP+20 hp (12%)
Standard
170 hp
Tuned
190 hp
Torque+40 Nm (15%)
Standard
260 Nm
Tuned
300 Nm
Suitability
Good (6.5/10)Gains Profile
Torque-focusedHeadroom
MediumOpel Insignia 1.6 Turbo 170hp ECU Remapping
Considering an ECU remap for your Opel Insignia 1.6 Turbo 170hp? A Stage 1 remap can take this 2015 - 2017 petrol engine from 170 BHP to 190 BHP and from 260 Nm to 300 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Opel Insignia can achieve.
How this engine compares
- 34thof 41 Opel Insignia engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 21%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Opel Insignia 1.6 Turbo 170hp is a 1.6L turbocharged petrol engine producing 170 BHP and 260 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 190 BHP and 300 Nm — a gain of around 20 BHP (12%) and 40 Nm (15%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
Other Insignia 2015 - 2017 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|