BHP+30 hp (20%)
Standard
150 hp
Tuned
180 hp
Torque+40 Nm (12%)
Standard
340 Nm
Tuned
380 Nm
Suitability
Good (7/10)Gains Profile
Power-focusedHeadroom
MediumNissan X-Trail 1.7 dCi 150hp ECU Remapping
Considering an ECU remap for your Nissan X-Trail 1.7 dCi 150hp? A Stage 1 remap can take this 2018 -> diesel engine from 150 BHP to 180 BHP and from 340 Nm to 380 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Nissan X-Trail can achieve.
How this engine compares
- 3rdof 12 Nissan X-Trail engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 21%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Nissan X-Trail 1.7 dCi 150hp is a 1.7L turbocharged diesel engine producing 150 BHP and 340 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 180 BHP and 380 Nm — a gain of around 30 BHP (20%) and 40 Nm (12%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other X-Trail 2018 -> Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.6 DCi 130hp | 130 → 155 | +25 |