BHP+30 hp (19%)
Standard
160 hp
Tuned
190 hp
Torque+60 Nm (16%)
Standard
380 Nm
Tuned
440 Nm
Suitability
Good (7/10)Gains Profile
BalancedHeadroom
MediumNissan Patrol 3.0 DI 160hp ECU Remapping
Considering an ECU remap for your Nissan Patrol 3.0 DI 160hp? A Stage 1 remap can take this 2014 -> diesel engine from 160 BHP to 190 BHP and from 380 Nm to 440 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Nissan Patrol can achieve.
How this engine compares
- 1stof 7 Nissan Patrol engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 41%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Nissan Patrol 3.0 DI 160hp is a 3.0L turbocharged diesel engine producing 160 BHP and 380 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 190 BHP and 440 Nm — a gain of around 30 BHP (19%) and 60 Nm (16%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Patrol 2014 -> Engines
| Engine | BHP | Gain | Torque |
|---|