Nissan Navara 2.3 DCi Bi-turbo (Euro 6) 163hp Remap
Expected gains of +22 BHP and +35 Nm torque
Get Your Free Quote ↓BHP+22 hp (13%)
Standard
163 hp
Tuned
185 hp
Torque+35 Nm (8%)
Standard
425 Nm
Tuned
460 Nm
Suitability
Good (6.5/10)Gains Profile
Power-focusedHeadroom
MediumNissan Navara 2.3 DCi Bi-turbo (Euro 6) 163hp ECU Remapping
Considering an ECU remap for your Nissan Navara 2.3 DCi Bi-turbo (Euro 6) 163hp? A Stage 1 remap can take this 2019 -> diesel engine from 163 BHP to 185 BHP and from 425 Nm to 460 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Nissan Navara can achieve.
How this engine compares
- 7thof 11 Nissan Navara engines by power gain
- 25%of the 9,842 engines we hold gain data for see a smaller power increase
- 20%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Nissan Navara 2.3 DCi Bi-turbo (Euro 6) 163hp is a 2.3L turbocharged diesel engine producing 163 BHP and 425 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 185 BHP and 460 Nm — a gain of around 22 BHP (13%) and 35 Nm (8%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Navara 2019 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|