BHP+35 hp (18%)
Standard
190 hp
Tuned
225 hp
Torque+90 Nm (20%)
Standard
450 Nm
Tuned
540 Nm
Suitability
Good (7/10)Gains Profile
BalancedHeadroom
MediumNissan Murano 2.5 DCi 190hp ECU Remapping
Considering an ECU remap for your Nissan Murano 2.5 DCi 190hp? A Stage 1 remap can take this 2010 -> diesel engine from 190 BHP to 225 BHP and from 450 Nm to 540 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Nissan Murano can achieve.
How this engine compares
- 1stof 2 Nissan Murano engines by power gain
- 54%of the 9,842 engines we hold gain data for see a smaller power increase
- 74%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Nissan Murano 2.5 DCi 190hp is a 2.5L turbocharged diesel engine producing 190 BHP and 450 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 225 BHP and 540 Nm — a gain of around 35 BHP (18%) and 90 Nm (20%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Murano 2010 -> Engines
| Engine | BHP | Gain | Torque |
|---|