BHP+24 hp (40%)
Standard
60 hp
Tuned
84 hp
Torque+50 Nm (29%)
Standard
170 Nm
Tuned
220 Nm
Suitability
Excellent (8.5/10)Gains Profile
Power-focusedHeadroom
HighNissan Kubistar 1.5 DCi 60hp ECU Remapping
Considering an ECU remap for your Nissan Kubistar 1.5 DCi 60hp? A Stage 1 remap can take this All diesel engine from 60 BHP to 84 BHP and from 170 Nm to 220 Nm of torque (turbocharged). This engine scores 8.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Nissan Kubistar can achieve.
How this engine compares
- 3rdof 3 Nissan Kubistar engines by power gain
- 27%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Nissan Kubistar 1.5 DCi 60hp is a 1.5L turbocharged diesel engine producing 60 BHP and 170 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 84 BHP and 220 Nm — a gain of around 24 BHP (40%) and 50 Nm (29%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Other Kubistar All Engines
| Engine | BHP | Gain |
|---|