BHP+21 hp (7%)
Standard
283 hp
Tuned
304 hp
Torque+25 Nm (7%)
Standard
358 Nm
Tuned
383 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowNissan Fuga 3.5 V6 283hp ECU Remapping
Considering an ECU remap for your Nissan Fuga 3.5 V6 283hp? A Stage 1 remap can take this All petrol engine from 283 BHP to 304 BHP and from 358 Nm to 383 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Nissan Fuga can achieve.
How this engine compares
- 1stof 2 Nissan Fuga engines by power gain
- 24%of the 9,842 engines we hold gain data for see a smaller power increase
- 14%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Nissan Fuga 3.5 V6 283hp is a 3.5L naturally aspirated petrol engine producing 283 BHP and 358 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 304 BHP and 383 Nm — a gain of around 21 BHP (7%) and 25 Nm (7%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Fuga All Engines
| Engine | BHP | Gain | Torque | Gain |
|---|