BHP+47 hp (17%)
Standard
270 hp
Tuned
317 hp
Torque+42 Nm (12%)
Standard
340 Nm
Tuned
382 Nm
Suitability
Moderate (4.5/10)Gains Profile
Power-focusedHeadroom
MediumNissan Altima 3.5 V6 270hp ECU Remapping
Considering an ECU remap for your Nissan Altima 3.5 V6 270hp? A Stage 1 remap can take this 2016 - 2018 petrol engine from 270 BHP to 317 BHP and from 340 Nm to 382 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Nissan Altima can achieve.
How this engine compares
- 74%of the 9,842 engines we hold gain data for see a smaller power increase
- 25%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Nissan Altima 3.5 V6 270hp is a 3.5L naturally aspirated petrol engine producing 270 BHP and 340 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 317 BHP and 382 Nm — a gain of around 47 BHP (17%) and 42 Nm (12%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. Unusually high gain for NA engine: treat as an estimate and verify against the exact engine variant.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!Unusually high gain for NA engine: treat as an estimate and verify against the exact engine variant.
Technical Specifications
- Fuel Type
- Petrol