BHP+27 hp (20%)
Standard
136 hp
Tuned
163 hp
Torque+56 Nm (18%)
Standard
304 Nm
Tuned
360 Nm
Suitability
Good (7/10)Gains Profile
BalancedHeadroom
MediumNissan Almera 2.2 DCi 136hp ECU Remapping
Considering an ECU remap for your Nissan Almera 2.2 DCi 136hp? A Stage 1 remap can take this All diesel engine from 136 BHP to 163 BHP and from 304 Nm to 360 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Nissan Almera can achieve.
How this engine compares
- 3rdof 6 Nissan Almera engines by power gain
- 35%of the 9,842 engines we hold gain data for see a smaller power increase
- 40%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Nissan Almera 2.2 DCi 136hp is a 2.2L turbocharged diesel engine producing 136 BHP and 304 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 163 BHP and 360 Nm — a gain of around 27 BHP (20%) and 56 Nm (18%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other Almera All Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.5 DCi 82hp | 82 → 107 | +25 |