BHP+20 hp (7%)
Standard
280 hp
Tuned
300 hp
Torque+20 Nm (6%)
Standard
350 Nm
Tuned
370 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowNissan 350Z 3.5 V6 - 280hp ECU Remapping
Considering an ECU remap for your Nissan 350Z 3.5 V6 - 280hp? A Stage 1 remap can take this All petrol engine from 280 BHP to 300 BHP and from 350 Nm to 370 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Nissan 350Z can achieve.
How this engine compares
- 2ndof 3 Nissan 350Z engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Nissan 350Z 3.5 V6 - 280hp is a 3.5L naturally aspirated petrol engine producing 280 BHP and 350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 300 BHP and 370 Nm — a gain of around 20 BHP (7%) and 20 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other 350Z All Engines
| Engine | BHP | Gain | Torque | Gain |
|---|