Mitsubishi Pajero 3.2 DiD 190hp Remap
Expected gains of +50 BHP and +59 Nm torque
Get Your Free Quote ↓BHP+50 hp (26%)
Standard
190 hp
Tuned
240 hp
Torque+59 Nm (13%)
Standard
441 Nm
Tuned
500 Nm
Suitability
Good (7/10)Gains Profile
Power-focusedHeadroom
MediumMitsubishi Pajero 3.2 DiD 190hp ECU Remapping
Considering an ECU remap for your Mitsubishi Pajero 3.2 DiD 190hp? A Stage 1 remap can take this All diesel engine from 190 BHP to 240 BHP and from 441 Nm to 500 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mitsubishi Pajero can achieve.
How this engine compares
- 1stof 7 Mitsubishi Pajero engines by power gain
- 76%of the 9,842 engines we hold gain data for see a smaller power increase
- 40%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mitsubishi Pajero 3.2 DiD 190hp is a 3.2L turbocharged diesel engine producing 190 BHP and 441 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 240 BHP and 500 Nm — a gain of around 50 BHP (26%) and 59 Nm (13%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Pajero All Engines
| Engine | BHP | Gain | Torque |
|---|