Mitsubishi Lancer 1.8 DiD 116hp Remap
Expected gains of +44 BHP and +60 Nm torque
Get Your Free Quote ↓BHP+44 hp (38%)
Standard
116 hp
Tuned
160 hp
Torque+60 Nm (20%)
Standard
300 Nm
Tuned
360 Nm
Suitability
Excellent (8/10)Gains Profile
Power-focusedHeadroom
HighMitsubishi Lancer 1.8 DiD 116hp ECU Remapping
Considering an ECU remap for your Mitsubishi Lancer 1.8 DiD 116hp? A Stage 1 remap can take this All diesel engine from 116 BHP to 160 BHP and from 300 Nm to 360 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mitsubishi Lancer can achieve.
How this engine compares
- 1stof 3 Mitsubishi Lancer engines by power gain
- 70%of the 9,842 engines we hold gain data for see a smaller power increase
- 41%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mitsubishi Lancer 1.8 DiD 116hp is a 1.8L turbocharged diesel engine producing 116 BHP and 300 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 160 BHP and 360 Nm — a gain of around 44 BHP (38%) and 60 Nm (20%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other Lancer All Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0 DiD 140hp | 140 → 180 | +40 |