BHP+30 hp (24%)
Standard
125 hp
Tuned
155 hp
Torque+56 Nm (19%)
Standard
294 Nm
Tuned
350 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighMitsubishi Fuso 3.0 DDi 125hp ECU Remapping
Considering an ECU remap for your Mitsubishi Fuso 3.0 DDi 125hp? A Stage 1 remap can take this 2006 -> ... diesel engine from 125 BHP to 155 BHP and from 294 Nm to 350 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mitsubishi Fuso can achieve.
How this engine compares
- 1stof 5 Mitsubishi Fuso engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 40%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mitsubishi Fuso 3.0 DDi 125hp is a 3.0L turbocharged diesel engine producing 125 BHP and 294 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 155 BHP and 350 Nm — a gain of around 30 BHP (24%) and 56 Nm (19%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
Other Fuso 2006 -> ... Engines
| Engine | BHP | Gain |
|---|