BHP+19 hp (9%)
Standard
201 hp
Tuned
220 hp
Torque+19 Nm (7%)
Standard
281 Nm
Tuned
300 Nm
Suitability
Moderate (4/10)Gains Profile
Power-focusedHeadroom
LowMercury Sable 3.0 V6 201hp ECU Remapping
Considering an ECU remap for your Mercury Sable 3.0 V6 201hp? A Stage 1 remap can take this 2004 - 2009 petrol engine from 201 BHP to 220 BHP and from 281 Nm to 300 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mercury Sable can achieve.
How this engine compares
- 2ndof 2 Mercury Sable engines by power gain
- 13%of the 9,842 engines we hold gain data for see a smaller power increase
- 7%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mercury Sable 3.0 V6 201hp is a 3.0L naturally aspirated petrol engine producing 201 BHP and 281 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 220 BHP and 300 Nm — a gain of around 19 BHP (9%) and 19 Nm (7%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Sable 2004 - 2009 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|