BHP+20 hp (8%)
Standard
240 hp
Tuned
260 hp
Torque+19 Nm (6%)
Standard
316 Nm
Tuned
335 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowMercury Mariner 3.0 V6 240hp ECU Remapping
Considering an ECU remap for your Mercury Mariner 3.0 V6 240hp? A Stage 1 remap can take this 2005 - 2012 petrol engine from 240 BHP to 260 BHP and from 316 Nm to 335 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mercury Mariner can achieve.
How this engine compares
- 1stof 2 Mercury Mariner engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 7%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mercury Mariner 3.0 V6 240hp is a 3.0L naturally aspirated petrol engine producing 240 BHP and 316 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 260 BHP and 335 Nm — a gain of around 20 BHP (8%) and 19 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Mariner 2005 - 2012 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|