BHP+49 hp (23%)
Standard
211 hp
Tuned
260 hp
Torque+90 Nm (18%)
Standard
510 Nm
Tuned
600 Nm
Suitability
Good (7.5/10)Gains Profile
Power-focusedHeadroom
HighMercedes-Benz R 320 CDI 211hp ECU Remapping
Considering an ECU remap for your Mercedes-Benz R 320 CDI 211hp? A Stage 1 remap can take this 2006 - 2010 diesel engine from 211 BHP to 260 BHP and from 510 Nm to 600 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mercedes-Benz R can achieve.
How this engine compares
- 7thof 14 Mercedes-Benz R engines by power gain
- 75%of the 9,842 engines we hold gain data for see a smaller power increase
- 74%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mercedes-Benz R 320 CDI 211hp is a 3.0L turbocharged diesel engine producing 211 BHP and 510 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 260 BHP and 600 Nm — a gain of around 49 BHP (23%) and 90 Nm (18%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.. Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
!Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.