BHP+20 hp (7%)
Standard
306 hp
Tuned
326 hp
Torque+25 Nm (5%)
Standard
460 Nm
Tuned
485 Nm
Suitability
Limited (3.5/10)Gains Profile
Limited headroomHeadroom
LowMercedes-Benz ML 500 V8 306hp ECU Remapping
Considering an ECU remap for your Mercedes-Benz ML 500 V8 306hp? A Stage 1 remap can take this W164 - 2005 - 2009 petrol engine from 306 BHP to 326 BHP and from 460 Nm to 485 Nm of torque (naturally aspirated). This engine scores 3.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mercedes-Benz ML can achieve.
How this engine compares
- 19thof 25 Mercedes-Benz ML engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 14%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mercedes-Benz ML 500 V8 306hp is a 5.0L naturally aspirated petrol engine producing 306 BHP and 460 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 326 BHP and 485 Nm — a gain of around 20 BHP (7%) and 25 Nm (5%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.
Other ML W164 - 2005 - 2009 Engines
| Engine |
|---|