Mercedes-Benz ML 320 V6 - 218hp Remap
Expected gains of +12 BHP and +20 Nm torque
Get Your Free Quote ↓BHP+12 hp (6%)
Standard
218 hp
Tuned
230 hp
Torque+20 Nm (6%)
Standard
310 Nm
Tuned
330 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowMercedes-Benz ML 320 V6 - 218hp ECU Remapping
Considering an ECU remap for your Mercedes-Benz ML 320 V6 - 218hp? A Stage 1 remap can take this W163 - 1997 - 2005 petrol engine from 218 BHP to 230 BHP and from 310 Nm to 330 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mercedes-Benz ML can achieve.
How this engine compares
- 25thof 25 Mercedes-Benz ML engines by power gain
- 7%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mercedes-Benz ML 320 V6 - 218hp is a 3.2L naturally aspirated petrol engine producing 218 BHP and 310 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 230 BHP and 330 Nm — a gain of around 12 BHP (6%) and 20 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other ML W163 - 1997 - 2005 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|