BHP+30 hp (9%)
Standard
320 hp
Tuned
350 hp
Torque+80 Nm (11%)
Standard
700 Nm
Tuned
780 Nm
Suitability
Moderate (4.5/10)Gains Profile
BalancedHeadroom
MediumMercedes-Benz GLE 350de 320hp ECU Remapping
Considering an ECU remap for your Mercedes-Benz GLE 350de 320hp? A Stage 1 remap can take this 2019 - 2023 diesel phev engine from 320 BHP to 350 BHP and from 700 Nm to 780 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mercedes-Benz GLE can achieve.
How this engine compares
- 17thof 22 Mercedes-Benz GLE engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 64%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mercedes-Benz GLE 350de 320hp is a 1.9L naturally aspirated diesel phev engine producing 320 BHP and 700 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 350 BHP and 780 Nm — a gain of around 30 BHP (9%) and 80 Nm (11%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.