BHP+41 hp (9%)
Standard
449 hp
Tuned
490 hp
Torque+70 Nm (11%)
Standard
650 Nm
Tuned
720 Nm
Suitability
Limited (3.5/10)Gains Profile
BalancedHeadroom
LowMercedes-Benz GLE 500e 449hp ECU Remapping
Considering an ECU remap for your Mercedes-Benz GLE 500e 449hp? A Stage 1 remap can take this 2015 - 2018 petrol phev engine from 449 BHP to 490 BHP and from 650 Nm to 720 Nm of torque (naturally aspirated). This engine scores 3.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mercedes-Benz GLE can achieve.
How this engine compares
- 15thof 22 Mercedes-Benz GLE engines by power gain
- 69%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mercedes-Benz GLE 500e 449hp is a 3.0L naturally aspirated petrol phev engine producing 449 BHP and 650 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 490 BHP and 720 Nm — a gain of around 41 BHP (9%) and 70 Nm (11%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.