BHP+18 hp (6%)
Standard
292 hp
Tuned
310 hp
Torque+24 Nm (7%)
Standard
365 Nm
Tuned
389 Nm
Suitability
Moderate (5.5/10)Gains Profile
Limited headroomHeadroom
LowMercedes-Benz E 350 CGi 292hp ECU Remapping
Considering an ECU remap for your Mercedes-Benz E 350 CGi 292hp? A Stage 1 remap can take this W212 - 2009 - 2013 petrol engine from 292 BHP to 310 BHP and from 365 Nm to 389 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mercedes-Benz E can achieve.
How this engine compares
- 95thof 102 Mercedes-Benz E engines by power gain
- 13%of the 9,842 engines we hold gain data for see a smaller power increase
- 13%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mercedes-Benz E 350 CGi 292hp is a 3.5L turbocharged petrol engine producing 292 BHP and 365 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 310 BHP and 389 Nm — a gain of around 18 BHP (6%) and 24 Nm (7%).
This engine has moderate remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
Other E W212 - 2009 - 2013 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|